UHB-ZK Slurry Pump
★Operating Temperature:-20oC ~80oC
★Flow:3m3/h ~ 1000 m3/h
★Pump lift:15m ~ 50m
★Product Overview :
It is an cantilever single stage single suction centrifugal pump .This Pump is Designed to transmit the corrosive mediums which contain particle or crystallization .
The Pump use the Cast Iron which lined with Ultra-high Molecular Polyethylene (UHM-PE) molding process to manufacture the pump . So it has premium performance in corrosion prevention and wear resistance .
Cantilever structure is designed to open in front semi-open impeller (No Front and Back Panels) .This Design enhance transfer liquids trafficability in Pump Chamber. And it can make the medium particles and impurities quickly through the pump chamber without block .
The sealing type are choose gland packing with K Type Fluorine Rubber sealing Ring outer zone cooling water device.and it meets the requirements of corrosion prevention and wear resistance.
★ Application Field :
The Overflow components adopt iron lined-in ultra-high molecular Polyethylene manufacturing.it have good corrosion wear.
it can transfer concentration bellows 80 % sulfuric acid ,the bellows 50% nitric acid , hydrochloric acid ,the concentration of each liquid alkali ,and mine with corrosive slurry and pulp , namely applicable clear liquid also applicable slurry
★ Technical Note
Min Flow Capacity:5m3/h (2900rpm)
Max Flow Capacity:400m3/h(1450rpm)
Pipeline Pressure to allow inhalation of 0.3Mpa.
Pump Maximum pressure: 1.6Mpa
★ Model and Technical Data
UHB-ZK80/50-30
UHB – Slurry Pump Code
Z – Semi-open Impller
K- Impurity
80-Inlet diameter is 65mm
50- Flow Capacity at 50 m3/h
30- Pump Head at 30 meters
★ Pump Parts Materials:
1.Pump Body: Cast Iron
2.Overflow Parts ( wetted parts) : UHM-PE (UPE)
3. Sealing Method: Gland Packing
4.Bearing : Gcr15 ( C & U Brand)
5.Alex Sleeve : 45 # Steel
6.Coupling :Cast Iron
7.Impeller : Semi-open type.
8.Motor : 3phase 380V/ 50Hz. ( WNM brand)
★ Pump Structure Map :
| Item No. | Name of part | Item No. | Name of part |
| 1 | Pump Cover | 12 | Pin (Flat Key) |
| 2 | O –type Seal Ring | 13 | Pump Shaft |
| 3 | Impeller Nut | 14 | Pin (Flat Key) |
| 4 | Impeller | 15 | Bearing Box Bracket |
| 5 | Pump Body | 16 | Bearing |
| 6 | Seal gasket | 17 | Bearing Cover |
| 7 | Shaft Sleeve | 18 | Shaft Coupling |
| 8 | Gland Packing Sealing | 19 | Shaft Coupling |
| 9 | Jamming Ring | 20 | Motor |
| 10 | Bearing Cover | 21 | Foundation |
| 11 | Bearing | 22 | Gland Packing |
★ Pump Specification Sheets :
★ Pump Installment Drawing :
★ Pump Curve Performance :
|
|
Slurry Pump Images
|
